Aller au contenu principal
Danger
Présentant un danger mortel
Danger de mort ou de mutilation si le tutoriel n'est pas suivi correctement. Faites preuve d'une extrême prudence et respectez tous les avertissements !
Danger

Pièces

Aucune pièce spécifiée.

  1. Disconnect the power supply cord from the outlet.
    • Disconnect the power supply cord from the outlet.

  2. Remove the eight screws holding the wood-patterned cover to the microwave frame. The first four screws are located on either side of the microwave front.
    • Remove the eight screws holding the wood-patterned cover to the microwave frame.

    • The first four screws are located on either side of the microwave front.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Remove the additional four screws securing the wood-paneled case to the microwave frame. Remove the additional four screws securing the wood-paneled case to the microwave frame.
    • Remove the additional four screws securing the wood-paneled case to the microwave frame.

  5. Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame. Lift the case upward slowly until the case is free of the microwave. Lift the case upward slowly until the case is free of the microwave.
    • Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame.

    • Lift the case upward slowly until the case is free of the microwave.

  6. Locate the fan in the newly exposed interior. Try spinning the fan with your finger. If it spins freely, the fan is not jammed.
    • Locate the fan in the newly exposed interior.

    • Try spinning the fan with your finger. If it spins freely, the fan is not jammed.

    • If the fan does not spin freely, locate what is jamming the fan and remove it.

  7. If the fan is not jammed yet still does not work, check that there are no disconnected wires, especially to the fan.
    • If the fan is not jammed yet still does not work, check that there are no disconnected wires, especially to the fan.

    • In order to work properly, there should be two wires going in and out of the fan. If you are missing either of these wires, locate the loose wire/s and connect them.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Melanie

Membre depuis le 26/09/2012

59 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 2-12, Propen Fall 2012 Membre de l'équipe Cal Poly, Team 2-12, Propen Fall 2012

CPSU-PROPEN-F12S2G12

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 7

Total : 1,116