Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
With the front display of the device facing you, rotate the device 90 degrees counter clockwise.
-
Remove the screw that is on the right side of the panel facing you.
-
Now rotate the device 180 degrees and remove the second screw.
-
Remove all screws with a phillips head screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Rotate the device so that the back faces you.
-
With a phillips head screwdriver, locate and remove the two screws highlighted by the red circles in image one.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Before removing top cover make sure that the back of the device is facing you.
-
Remove the top cover by bending out on the sides, and pulling the cover towards you while applying upward pressure.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Tilt the device on its front side until you can see underneath the white circular component mentioned in the note above.
-
Locate the spindle circled in figure two and apply one or two drops of 3 in 1 lubricating oil to the spindle.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
3 commentaires
Thanks you saved my Christmas and nailed this as my wife loves Christmas music in the background for our family dinner. Thanks again and Merry Christmas
I have a Panasonic NV-SD235 and I have a tape stuck with the error H02.