Introduction

This guide will help you repair the buttons on the Seville Classics MSC10166 Tower Fan.

Pièces

Aucune pièce nécessaire.

Use a Philips #2 screwdriver to unscrew the four 6mm Phillips #0 back screws.
  • Use a Philips #2 screwdriver to unscrew the four 6mm Phillips #0 back screws.

  • Do this by unscrewing from left-to-right then pull the screws out of the back of the fan

Ajouter un commentaire

Pull the front and back cover apart.
  • Pull the front and back cover apart.

  • Be careful not to pull the front cover off completely because it holds the wires.

Ajouter un commentaire

  • Remove the Phillips (5-mm head) 6-mm screw that holds the circuit board to the outer shell of the fan.

  • Make sure the fan is unplugged while removing the circuit board as you may get shocked.

  • To remove the screws, unscrew in a left-to-right fashion at an angle to make sure that the wires do not get tangled.

Ajouter un commentaire

  • Remove the top cover containing the circuit board and the wires by pulling it away from the body of the fan.

Ajouter un commentaire

  • Remove the circuit board from the top cover. Do not touch the other side of the circuit board as you may damage circuit elements.

  • Unscrew the four screws on the top of the circuit board in a left-to-right fashion. After pull screws out of the board.

Ajouter un commentaire

  • Next remove the two (7-mm head) 8-mm screws that attach the buttons to the top cover of the fan.

  • To do this, unscrew in an upright position and pull screw out after.

Ajouter un commentaire

  • Remove the buttons from the top cover.

Ajouter un commentaire

  • Wipe down any dirt on the buttons.

Ajouter un commentaire

  • Wipe down the frame that holds the buttons.

  • Reverse the order of this guide in order to put back together the fan.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Queena Phung

Membre depuis le 26/09/2012

96 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 15-46, Forte Fall 2012 Membre de l'équipe Cal Poly, Team 15-46, Forte Fall 2012

CPSU-FORTE-F12S15G46

5 membres

6 tutoriels rédigés

Great work but our problem is the micro switch itself, after exposing the circuit board I shorted the backside solder connections to cycle the fan on and off, everything works perfectly…..now I only need to know a part number so I can find a on/off micro switch.

any suggestions?

Thanks for any help you can provide

rickkingsbury@comcast.net

Rick - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 8

30 derniers jours : 38

Total : 1,567