Introduction
This is a guide on how to replace the touch screen on a Palm Tungsten E.
Ce dont vous avez besoin
-
-
Remove the stylus and SD card.
-
Using a T5 torx screwdriver, remove all 4 back panel screws.
-
-
-
-
Reassemble the device in the reverse order of the tear down using the new screen in place of the old screen.
-
To reconnect the flex connector press up on the blocks with the spudger to ensure they click into place.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.