Réparez vos affaires Communauté Boutique

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Replacing the Macintosh PowerBook 1400c Monitor

Introduction

This repair guide will give you step by step instructions on how to remove the Macintosh PowerBook 1400c Monitor.

Ce dont vous avez besoin

  1. Replacing the Macintosh PowerBook 1400c Monitor, Battery: étape 1, image 1 de 1

    • Turn the device upside down and then locate the battery latch near the front of the device.

    Traduire

  2. Replacing the Macintosh PowerBook 1400c Monitor: étape 2, image 1 de 1

    • Slide the latch to the left to release the battery.

    Traduire

  3. Replacing the Macintosh PowerBook 1400c Monitor: étape 3, image 1 de 1

    • Continue holding the latch then gently pull the battery out of the device.

    • Place the battery in a safe location.

    Traduire

  4. Replacing the Macintosh PowerBook 1400c Monitor, CD-ROM Drive: étape 4, image 1 de 1

    • Locate the CD-ROM Drive latch.

    Traduire

  5. Replacing the Macintosh PowerBook 1400c Monitor: étape 5, image 1 de 1

    • Slide the latch to the right to release the CD ROM drive.

    Traduire

  6. Replacing the Macintosh PowerBook 1400c Monitor: étape 6, image 1 de 1

    • Continue holding the latch then gently pull the CD-ROM Drive out of the device.

    • Place the CD ROM drive in a safe location.

    Traduire

  7. Replacing the Macintosh PowerBook 1400c Monitor, Keyboard: étape 7, image 1 de 1

    • Locate the speaker cover.

    Traduire

  8. Replacing the Macintosh PowerBook 1400c Monitor: étape 8, image 1 de 1

    • Press firmly on each end of the speaker cover and slide it to the left.

    Traduire

  9. Replacing the Macintosh PowerBook 1400c Monitor: étape 9, image 1 de 1

    • Gently lift the speaker cover to remove it.

    Traduire

  10. Replacing the Macintosh PowerBook 1400c Monitor: étape 10, image 1 de 1

    • Lift the keyboard up from the back using a spudger(wedge side).

    Traduire

  11. Replacing the Macintosh PowerBook 1400c Monitor: étape 11, image 1 de 1

    • Gently lift the keyboard until only the ribbon cable remains attached.

    Traduire

  12. Replacing the Macintosh PowerBook 1400c Monitor: étape 12, image 1 de 1

    • Tilt the keyboard away from the screen.

    Traduire

  13. Replacing the Macintosh PowerBook 1400c Monitor: étape 13, image 1 de 1

    • Locate the six screws that secure the heatsink.

    Traduire

  15. Replacing the Macintosh PowerBook 1400c Monitor: étape 14, image 1 de 1

    • Remove the six screws from the heatsink using the Philips #1 screwdriver.

    Traduire

  16. Replacing the Macintosh PowerBook 1400c Monitor: étape 15, image 1 de 1

    • Lift the heatsink from the side closest to the laptop screen.

    Traduire

  17. Replacing the Macintosh PowerBook 1400c Monitor: étape 16, image 1 de 1

    • Remove the heatsink.

    Traduire

  18. Replacing the Macintosh PowerBook 1400c Monitor: étape 17, image 1 de 1

    • Gently pull up on the beige ribbon lock until it moves a short distance on both sides to separate the ribbon cable from the connector.

    Traduire

  19. Replacing the Macintosh PowerBook 1400c Monitor: étape 18, image 1 de 1

    • Detach the ribbon cable.

    Traduire

  20. Replacing the Macintosh PowerBook 1400c Monitor: étape 19, image 1 de 1

    • Remove the keyboard.

    Traduire

  21. Replacing the Macintosh PowerBook 1400c Monitor, Monitor: étape 20, image 1 de 1

    • Identify the right and left monitor end caps.

    Traduire

  22. Replacing the Macintosh PowerBook 1400c Monitor: étape 21, image 1 de 1

    • Pry off the end caps by putting a spudger between the monitor hinge and the end cap and prying outwards.

    Traduire

  23. Replacing the Macintosh PowerBook 1400c Monitor: étape 22, image 1 de 1

    • Once the end cap has been loosened by the spudger, pull outwards on the end caps.

    Traduire

  24. Replacing the Macintosh PowerBook 1400c Monitor: étape 23, image 1 de 1

    • Completely remove both end caps.

    Traduire

  25. Replacing the Macintosh PowerBook 1400c Monitor: étape 24, image 1 de 1

    • Identify the 4 total screw under the end caps (2 under each end cap).

    • The two outside 16mm long screws

    • The two inside 5.4mm long screws

    Traduire

  26. Replacing the Macintosh PowerBook 1400c Monitor: étape 25, image 1 de 1

    • Lay the monitor all the way back.

    Traduire

  27. Replacing the Macintosh PowerBook 1400c Monitor: étape 26, image 1 de 1

    • Remove the 4 screws using the Phillips #0 screwdriver.

    Traduire

  28. Replacing the Macintosh PowerBook 1400c Monitor: étape 27, image 1 de 1

    • Identify the center cap of the monitor.

    Traduire

  29. Replacing the Macintosh PowerBook 1400c Monitor: étape 28, image 1 de 1

    • Pry the center cap off by placing the spudger between the hinge and the center cap and prying upwards.

    Traduire

  30. Replacing the Macintosh PowerBook 1400c Monitor: étape 29, image 1 de 1

    • Detach the center cap completely.

    Traduire

  31. Replacing the Macintosh PowerBook 1400c Monitor: étape 30, image 1 de 1

    • Identify the one 12.6mm long screw under the center cap.

    Traduire

  32. Replacing the Macintosh PowerBook 1400c Monitor: étape 31, image 1 de 1

    • Remove the center screw with a Phillips #0 screwdriver.

    Traduire

  33. Replacing the Macintosh PowerBook 1400c Monitor: étape 32, image 1 de 1

    • Lift upwards on the metal cover under the screw.

    Traduire

  34. Replacing the Macintosh PowerBook 1400c Monitor: étape 33, image 1 de 1

    • Completely remove the metal cover.

    Traduire

  35. Replacing the Macintosh PowerBook 1400c Monitor: étape 34, image 1 de 1

    • Identify where the left and right monitor cords are attached to the logic board

    • The base of the left monitor cord

    • The base of the right monitor cord

    Traduire

  36. Replacing the Macintosh PowerBook 1400c Monitor: étape 35, image 1 de 1

    • To detach the left monitor cord grab the left monitor cord at the base of the cord and pull vertically up.

    Traduire

  37. Replacing the Macintosh PowerBook 1400c Monitor: étape 36, image 1 de 1

    • Completely detach the left monitor cord from the logic board.

    Traduire

  38. Replacing the Macintosh PowerBook 1400c Monitor: étape 37, image 1 de 1

    • To detach the right monitor cord grab the right monitor cord at the base of the cord and pull vertically up.

    Traduire

  39. Replacing the Macintosh PowerBook 1400c Monitor: étape 38, image 1 de 1

    • Completely detach the right monitor cord from the logic board.

    Traduire

  40. Replacing the Macintosh PowerBook 1400c Monitor: étape 39, image 1 de 1

    • Completely remove the monitor from the computer.

    Traduire
Conclusion

Once the monitor has been removed, to attach the new monitor follow these instructions in reverse order.

5 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Taylor Chris

Membre depuis le 04/01/11

187 Réputation

1 tutoriel rédigé

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team 10-39, Forte Spring 2011 Membre de l'équipe Cal Poly, Team 10-39, Forte Spring 2011

CPSU-FORTE-S11S10G39

5 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 10

30 derniers jours : 27

Total : 4,169