Aller au contenu principal

Introduction

]

Vidéo d'introduction

  1. Make sure power is off, and remove the side panel.
    • Make sure power is off, and remove the side panel.

  2. Remove the screws that hold the GPU in on the rear bracket.
    • Remove the screws that hold the GPU in on the rear bracket.

  3. Unlock the PCI-e slot chip.
    • Unlock the PCI-e slot chip.

  4. Remove the GPU by gently pulling on the card.
    • Remove the GPU by gently pulling on the card.

  5. Hover the new GPU over the PCI-e slot.
    • Hover the new GPU over the PCI-e slot.

  6. Push down on the card to slide the connector into the slot.
    • Push down on the card to slide the connector into the slot.

  7. Ensure that the secure locks click into place.
    • Ensure that the secure locks click into place.

  8. Screw the rear bracket down to secure the card to the chassis.
    • Screw the rear bracket down to secure the card to the chassis.

  9. Reconnect any required GPU cables.
    • Reconnect any required GPU cables.

  10. Reattach the side panel.
    • Reattach the side panel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Lance Donadel

Membre depuis le 25/04/2018

221 Réputation

1 tutoriel rédigé

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 22

Total : 848