Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

The Palm m105 is a personal digital assistant that can be a useful tool. The palm can experience slowdowns and freezes. The easiest way to fix this problem is to reset the Palm. Resets are easy to perform and will take no time. There are two types of reset a soft reset and a hard reset. A soft reset will solve most problems. If the problem persists after a soft reset proceed with a hard reset.

Outils

Pièces

Aucune pièce spécifiée.

  1. To soft reset the device, use a paperclip to carefully press the reset button located on the back of the device. The exact location of the button can be seen in the picture.
    • To soft reset the device, use a paperclip to carefully press the reset button located on the back of the device. The exact location of the button can be seen in the picture.

    • A soft reset means that it will usually not affect your personal data on your device, unless the batteries are low.

    • After you press the button, the device will reboot as if you just powered on your device and it should clear up most common device problems.

    • If your device is still not powering up or has a blank display, the next step will help you perform a hard reset of the device.

  2. Kits pour Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits

    Kits pour Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits
  3. A hard reset will erase all current data on the device. This should only be done if a soft reset has not solved your problem. A hard reset is done by simultaneously holding down the power button while also pressing the reset button on the back with a paper clip like you did for the soft reset. After a few seconds the Palm logo should appear, when it does, release the power button.
    • A hard reset will erase all current data on the device. This should only be done if a soft reset has not solved your problem.

    • A hard reset is done by simultaneously holding down the power button while also pressing the reset button on the back with a paper clip like you did for the soft reset. After a few seconds the Palm logo should appear, when it does, release the power button.

    • If applicable, you can restore any data previously synchronized with your PC through the HotSync operation of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Erik Thompson

Membre depuis le 04/10/2011

31 Réputation

5 tutoriels rédigés

Équipe

UW Stout, Team 1-3, Zhou Fall 2011 Membre de l'équipe UW Stout, Team 1-3, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G3

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 1,062