Aller au contenu principal

Respironics REMstar Plus M Series Power Supply Circuit board Replacement

Ce dont vous avez besoin

  1. Respironics REMstar Plus M Series Power Supply Circuit board Replacement, Power Supply Circuit board: étape 1, image 1 de 3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement, Power Supply Circuit board: étape 1, image 2 de 3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement, Power Supply Circuit board: étape 1, image 3 de 3
    • Place the device face down.

    • Use a T15 Torx screwdriver to remove the six screws in the base plate.

    • Lift the base plate off of the device.

  2. Respironics REMstar Plus M Series Power Supply Circuit board Replacement: étape 2, image 1 de 3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement: étape 2, image 2 de 3 Respironics REMstar Plus M Series Power Supply Circuit board Replacement: étape 2, image 3 de 3
    • Flip the circuit board over to the right.

    • Gently pull the ribbon cable outward to disconnect it from the circuit board.

  3. Respironics REMstar Plus M Series Power Supply Circuit board Replacement: étape 3, image 1 de 2 Respironics REMstar Plus M Series Power Supply Circuit board Replacement: étape 3, image 2 de 2
    • Disconnect the red 3-wire plug at the top left of the board and the white 4-wire plug at the bottom left.

    • Remove the circuit board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Brent Forrest

Membre depuis le 09/17/20

173 Réputation

2 tutoriels rédigés

2 commentaires

My unit stops working in the middle of the night, then beeps, & blue light flashes. Will replacing this board fix this, and where can I get one?

mert454 - Réponse

Where to find a power supply circuit board for my Remstar plus m series which just blinks blue lights. dledes@shaw.ca

David Edes - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 9

Total : 953