Introduction

Clean the head of the hairdryer, including the vent, to prevent the fan from getting clogged. Debris in the fan may cause a rattling noise or cause the fan to stop working.

Before disassembly, make sure that the device is unplugged.
  • Before disassembly, make sure that the device is unplugged.

  • Unscrew the two 17.83 mm black screws located on the handle.

Ajouter un commentaire

Separate the shell from the main component.
  • Separate the shell from the main component.

  • Make sure that the each piece is free from debris.

Ajouter un commentaire

  • Continue to pull the components apart.

  • For reassembly, put the silver encasing on before the the black cover.

Ajouter un commentaire

  • Take the head of the hairdryer and pull the pieces apart.

Ajouter un commentaire

  • Remove the black vent from the grey cylindrical piece.

Ajouter un commentaire

  • If there is lint in the vent, use tweezers or a toothbrush to extract it from the vent.

  • This will keep the fan from getting clogged and malfunctioning.

Ajouter un commentaire

  • Clean the other black vent with a toothbrush.

Ajouter un commentaire

  • Clean these two components with a paper towel.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jessica Leyva

Membre depuis le 18/09/2012

80 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 1-5, Propen Fall 2012 Membre de l'équipe Cal Poly, Team 1-5, Propen Fall 2012

CPSU-PROPEN-F12S1G5

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 4

30 derniers jours : 18

Total : 977