Pièces

Aucune pièce nécessaire.

Before disassembly, make sure that the device is unplugged.
  • Before disassembly, make sure that the device is unplugged.

  • Unscrew the two 17.83 mm black screws located on the handle.

Ajouter un commentaire

Separate the shell from the main component.
  • Separate the shell from the main component.

  • Make sure that the each piece is free from debris.

Ajouter un commentaire

Continue to pull the components apart. For reassembly, put the silver encasing on before the the black cover. For reassembly, put the silver encasing on before the the black cover.
  • Continue to pull the components apart.

  • For reassembly, put the silver encasing on before the the black cover.

Ajouter un commentaire

The heating element is the group of tightly coiled bronze wires behind the vent hose as well as the silver coils.
  • The heating element is the group of tightly coiled bronze wires behind the vent hose as well as the silver coils.

  • Make sure that there are no breaks or debris obstructing the wires of the heating element.

Ajouter un commentaire

To test the heating element, use a digital multimeter.
  • To test the heating element, use a digital multimeter.

  • Set the multimeter to 200 under ACV.

  • Bring the ends of the multimeter toward the two lead wires.

  • If the circuit between the wires is closed, the numbers on the multimeter should keep changing.

  • If the numbers are not changing, replace the heating element.

  • If the circuit is closed, check the thermal cutout.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jessica Leyva

Membre depuis le 18/09/2012

80 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 1-5, Propen Fall 2012 Membre de l'équipe Cal Poly, Team 1-5, Propen Fall 2012

CPSU-PROPEN-F12S1G5

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 14

Total : 1,006