Réparez vos affaires Communauté Boutique

Ricoh Shotmaster 130Z Zooming Lens Replacement

Introduction

If the zooming lens of your Ricoh Shotmaster 130Z camera is broken or malfunctioning, this guide will show you how to replace it step-by-step.

Ce dont vous avez besoin

  1. Ricoh Shotmaster 130Z Zooming Lens Replacement, Zooming Lens: étape 1, image 1 de 1

    • Set the dials to "A" (Auto), and Off mode.

    • You will not be able to move these dials once the case has been opened.

    Modifier

  2. Ricoh Shotmaster 130Z Zooming Lens Replacement: étape 2, image 1 de 3 Ricoh Shotmaster 130Z Zooming Lens Replacement: étape 2, image 2 de 3 Ricoh Shotmaster 130Z Zooming Lens Replacement: étape 2, image 3 de 3

    • Remove the 5 Phillips screws from the sides and the back.

    Modifier

  4. Ricoh Shotmaster 130Z Zooming Lens Replacement: étape 3, image 1 de 2 Ricoh Shotmaster 130Z Zooming Lens Replacement: étape 3, image 2 de 2

    • Remove the 5mm JIS #00 screws from the bottom of the camera.

    • Pay attention to the 6mm screws on the sides of the tripod slot, as they are a slightly different size from the rest of the screws. However, you still may use a J00 screwdriver to remove them.

    Modifier

  5. Ricoh Shotmaster 130Z Zooming Lens Replacement: étape 4, image 1 de 2 Ricoh Shotmaster 130Z Zooming Lens Replacement: étape 4, image 2 de 2

    • Using an opening tool, lift the case of the tripod slot (on the bottom) until the back portion of the case is released.

    • Continue to use the the opening tool to insert it and lift right next to the strap of the camera.

    • This will release the front portion of the case.

    Modifier

  6. Ricoh Shotmaster 130Z Zooming Lens Replacement: étape 5, image 1 de 3 Ricoh Shotmaster 130Z Zooming Lens Replacement: étape 5, image 2 de 3 Ricoh Shotmaster 130Z Zooming Lens Replacement: étape 5, image 3 de 3

    • Use a JIS #0 screwdriver to remove the three marked screws found around the perimeter of the lens.

    Modifier

  7. Ricoh Shotmaster 130Z Zooming Lens Replacement: étape 6, image 1 de 3 Ricoh Shotmaster 130Z Zooming Lens Replacement: étape 6, image 2 de 3 Ricoh Shotmaster 130Z Zooming Lens Replacement: étape 6, image 3 de 3
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète

    • Proceed to remove the two screws using a JIS #00 screwdriver.

    • Use tweezers to lift the lens off of the board.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 13 autres contributeurs

anna carolina von einem

Membre depuis le 10/19/16

450 Réputation

4 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

UMass Dartmouth, Team 3-4, Isaacson Fall 2016 Membre de l'équipe UMass Dartmouth, Team 3-4, Isaacson Fall 2016

UMASSD-ISAACSON-F16S3G4

3 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 4

Total : 536