Introduction
Disassembling the handle assembly will be necessary for any rewiring or switch replacement needs. Jammed switches or a damaged power cord will require these preliminary steps for repair.
Ce dont vous avez besoin
-
-
Using a Torx T20 screwdriver, unscrew the five M5 x 16 mm screws.
-
Using the T20 screwdriver, remove the M5 x 28 mm screw.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.