Réparez vos affaires Communauté Boutique

Ridgid Brushless R86040 Guard Replacement

Introduction

With this guide, you will be able to remove, replace, and/or change the position of the guard on your Ridgid Brushless R86040. You should replace the guard anytime it becomes bent or damaged as this is a safety hazard. Users may also wish to rotate the guard to its various positions for different cutting and grinding angles. Before you begin, make sure the power is off, the battery is not attached to the device, and the cutting blade has been removed.

  1. Ridgid Brushless R86040 Guard Replacement, Guard: étape 1, image 1 de 1

    • Identify the silver lever behind by where the guard and blade are located.

    Modifier

  3. Ridgid Brushless R86040 Guard Replacement: étape 2, image 1 de 2 Ridgid Brushless R86040 Guard Replacement: étape 2, image 2 de 2

    • While pressing the lever, spin the guard clockwise. The teeth holding it together will line up and the guard will detach from the rest of the device.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 5

Total : 140