Introduction
This guide shows how to properly remove and replace the handle on your Ridgid Brushless R86040. This may be necessary if it has become damaged and it becomes a safety hazard to use while operating the device, or if you feel like upgrading to a better handle. Before attempting any of the following steps, make sure you turn off your device and remove the battery.
-
-
To remove the handle, firmly turn it counterclockwise while pulling it away from the device until it comes out.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Équipe
Embry-Riddle Aeronautical University, Team S22-G7, Branham Fall 2019 Membre de l'équipe Embry-Riddle Aeronautical University, Team S22-G7, Branham Fall 2019
ERAU-BRANHAM-F19S22G7
3 membres
2 tutoriels rédigés
