Réparez vos affaires Communauté Boutique

Ridgid R175RNE Magazine Replacement

Introduction

If your Ridgid R175RNE pneumatic coil nailer magazine is cracked or is otherwise no longer able to hold nails, then follow this guide to learn how to replace the magazine.

The magazine is what holds the coil of nails prior to them being fired, and is located directly below the firing mechanism.

Caution: Be sure that there are no nails present in the magazine before removing it.

Ce dont vous avez besoin

  1. Ridgid R175RNE Magazine Replacement, Magazine: étape 1, image 1 de 1

    • Disconnect the nailer from the air compressor before beginning.

    • Set the nailer down with the nosepiece facing to the left.

    Modifier

  3. Ridgid R175RNE Magazine Replacement: étape 2, image 1 de 1

    • Remove the single 5/32" hex screw that secures the magazine to the lower portion of the handle.

    Modifier

  4. Ridgid R175RNE Magazine Replacement: étape 3, image 1 de 1

    • Give the magazine a slight tug to detach it from the upper firing assembly.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Brandin M

Membre depuis le 02/06/24

483 Réputation

5 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

University of North Texas, Team 3-7, Kilpatrick Spring 2024 Membre de l'équipe University of North Texas, Team 3-7, Kilpatrick Spring 2024

UNT-KILPATRICK-S24S3G7

3 membres

8 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 18

Total : 44