Aller au contenu principal

Ridgid R86037 Coupler Replacement

Ce dont vous avez besoin

  1. Ridgid R86037 Coupler Replacement, Coupler: étape 1, image 1 de 1
    • Using a Torx screwdriver, remove the four M2.2x1 inch screws from the end cap.

  2. Ridgid R86037 Coupler Replacement: étape 2, image 1 de 1
    • Remove the end cap from the back of the driver.

  3. Ridgid R86037 Coupler Replacement: étape 3, image 1 de 1
    • Remove the two M3.5x10 mm screws from the back of the driver under the end cap.

  4. Ridgid R86037 Coupler Replacement: étape 4, image 1 de 1
    • Remove the seven M3.5x16 mm screws from the right side of the driver.

  5. Ridgid R86037 Coupler Replacement: étape 5, image 1 de 1
    • Remove the side of the driver, exposing the inner machinery.

  6. Ridgid R86037 Coupler Replacement: étape 6, image 1 de 1
    • Remove the coupler by pulling up and releasing it from the gear assembly.

  7. Ridgid R86037 Coupler Replacement: étape 7, image 1 de 1
    • Detach the wire plug from the device and replace the old coupler with the new coupler.

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Luke Stokes

Membre depuis le 01/16/19

464 Réputation

2 tutoriels rédigés

Équipe

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 659