Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

If your Mounting Bracket is broken or you need to replace it, then you will need to follow these steps to effectively replace the Mounting Bracket.

Pièces

Aucune pièce spécifiée.

  1. Place Mounting Bracket with lower elevation facing towards you.
    • Place Mounting Bracket with lower elevation facing towards you.

  2. Use a Phillips #1 screwdriver to unscrew the single bracket screw.
    • Use a Phillips #1 screwdriver to unscrew the single bracket screw.

  3. Hold two corners from the middle of bracket and stretch outward.
    • Hold two corners from the middle of bracket and stretch outward.

  4. Slide bracket upwards.
    • Slide bracket upwards.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Smoo Rena

Membre depuis le 17/01/2019

75 Réputation

3 tutoriels rédigés

I have lost the single bracket screw. Where can I get a replacement?

Rick Burgess - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 8

30 derniers jours : 32

Total : 1,216