Réparez vos affaires Communauté Boutique

Ring Stick Up Cam Microphone Replacement

Introduction

In this guide, we will show you how to replace the microphone in a Ring Stick Up Cam. You will need a Phillips #00 screwdriver and a plastic opening tool.

Ce dont vous avez besoin

  1. Ring Stick Up Cam Microphone Replacement, Battery: étape 1, image 1 de 1

    • Remove the six 6mm Phillips #00 screws from the back of the device.

    Modifier

  2. Ring Stick Up Cam Microphone Replacement: étape 2, image 1 de 1

    • Pry off the aluminum plate using a plastic opening tool.

    Modifier

  3. Ring Stick Up Cam Microphone Replacement: étape 3, image 1 de 1

    • Remove the two 6mm Phillips #00 screws that were under the aluminum plate.

    Modifier

  4. Ring Stick Up Cam Microphone Replacement: étape 4, image 1 de 1

    • Pry off the back cover using a plastic opening tool.

    Modifier

  5. Ring Stick Up Cam Microphone Replacement: étape 5, image 1 de 1

    • Disconnect the battery power leads using a plastic opening tool.

    Modifier

  6. Ring Stick Up Cam Microphone Replacement: étape 6, image 1 de 1

    • Use a plastic opening tool to loosen the adhesive holding the battery in place and remove the battery by hand.

    Modifier

  8. Ring Stick Up Cam Microphone Replacement, Camera: étape 7, image 1 de 1

    • Remove the three silver 6mm Phillips #00 screws holding the motherboard in the device.

    Modifier

  9. Ring Stick Up Cam Microphone Replacement: étape 8, image 1 de 1

    • Disconnect the ribbon connector shown in the photo.

    Modifier

  10. Ring Stick Up Cam Microphone Replacement: étape 9, image 1 de 1

    • Remove the motherboard from the device by hand.

    Modifier

  11. Ring Stick Up Cam Microphone Replacement: étape 10, image 1 de 1

    • Remove the two black 5mm Phillips #00 screws holding the camera board into the device.

    • Remove the single silver 10mm Phillips #00 screw holding the camera board into the device.

    Modifier

  12. Ring Stick Up Cam Microphone Replacement: étape 11, image 1 de 1

    • Remove the three plastic spacers shown in the photo by hand.

    Modifier

  13. Ring Stick Up Cam Microphone Replacement: étape 12, image 1 de 1

    • Carefully disconnect the camera board from the daughterboard by sliding a plastic opening tool between the camera board and the daughterboard.

    Modifier

  14. Ring Stick Up Cam Microphone Replacement: étape 13, image 1 de 1

    • Lift the camera board out of the housing using your hand.

    Modifier

  15. Ring Stick Up Cam Microphone Replacement, Microphone: étape 14, image 1 de 1

    • Remove the six silver 4.5mm Phillips #00 screws holding the daughterboard into the device.

    Modifier

  16. Ring Stick Up Cam Microphone Replacement: étape 15, image 1 de 1

    • Use a plastic opening tool to carefully pry the microphone from the housing.

    Modifier

  17. Ring Stick Up Cam Microphone Replacement: étape 16, image 1 de 1

    • Use your hands to remove the daughterboard containing the microphone from the housing.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Chunyue Liu

Membre depuis le 02/06/19

273 Réputation

2 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

UC Davis, Team S18-G3, Lore Winter 2019 Membre de l'équipe UC Davis, Team S18-G3, Lore Winter 2019

UCD-LORE-W19S18G3

3 membres

8 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 24

Total : 2,654