Aller au contenu principal

Introduction

In this guide, you will be shown how to take apart and replace the camera of the Ring Video Doorbell step-by-step. You will need a Phillips screwdriver size PH00 and a Plastic Tool Opener.

Pièces

Aucune pièce spécifiée.

  1. Ring Video Doorbell  Camera Replacement, Camera: étape 1, image 1 de 3 Ring Video Doorbell  Camera Replacement, Camera: étape 1, image 2 de 3 Ring Video Doorbell  Camera Replacement, Camera: étape 1, image 3 de 3
    • Start by using the PH00 Phillips Screwdriver to take out the 6 1 mm screw's on the bottom of the device.

    • Pry open the aluminum plate using the Plastic Opening Tool(s).

    • Remove the 2 1. mm screws using the PH00 Phillips Screwdriver.

  2. Ring Video Doorbell  Camera Replacement: étape 2, image 1 de 3 Ring Video Doorbell  Camera Replacement: étape 2, image 2 de 3 Ring Video Doorbell  Camera Replacement: étape 2, image 3 de 3
    • Pry open the back case as shown using the Plastic Opening Tool.

    • Disconnect the battery from motherboard by carefully pulling up on the connector.

  3. Ring Video Doorbell  Camera Replacement: étape 3, image 1 de 3 Ring Video Doorbell  Camera Replacement: étape 3, image 2 de 3 Ring Video Doorbell  Camera Replacement: étape 3, image 3 de 3
    • Unscrew the 9 1 mm screwdrivers using a PH00 Phillips Screwdriver.

    • Carefully detach the motherboard, from the housing unit using your hands.

  4. Ring Video Doorbell  Camera Replacement: étape 4, image 1 de 2 Ring Video Doorbell  Camera Replacement: étape 4, image 2 de 2
    • Using the Plating Tool Opener, arefully disconnect the ribbon cable that attaches the camera to the housing.

    • Replace camera, and follow the steps in reverse order to reassemble

  5. Ring Video Doorbell  Camera Replacement: étape 5, image 1 de 2 Ring Video Doorbell  Camera Replacement: étape 5, image 2 de 2
    • Unscrew the two 1 mm screws using the PH00 Philips Screwdriver.

    • Detach the black and red wire connected to the motherboard, using the tweezers, to remove the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Isaiah Wilson

Membre depuis le 20/02/2018

231 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team S11-G5, Cheng Spring 2018 Membre de l'équipe USF Tampa, Team S11-G5, Cheng Spring 2018

USFT-CHENG-S18S11G5

3 membres

5 tutoriels rédigés

6 commentaires

What camera should I use to replace a malfunctioning camera in the ring video doorbell? And where do I buy it?

jonathan.byus - Réponse

Bump. What camera should I use to replace? (Scratched Lens.) Is the lens you can touch, a lens, or is it just a cover? Mine fell at there is chip right in the center that make the image unusable.

Bobby Diggins - Réponse

I have a scratch dead center of mine too. Have no clue how it got there as I’m super careful when I take it off to charge. Ugh. did you find out where to buy a replacement?

Kim Townsend -

What camera should I use to replace? (Scratched Lens.)  I have the right 1st generation with a 740p camera

meanltltoo - Réponse

Has anyone found a replacement camera online?

christina.stewart - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 8

7 derniers jours : 52

30 derniers jours : 291

Total : 11,015