Introduction

This guide begins after completing the motherboard replacement guide. All you will need for speaker replacement is a plastic opening tool. Speaker replacement may be needed if you are having sound issues.

Pièces

Aucune pièce nécessaire.

Start by using the PH00 Phillips Screwdriver to take out the 6 1 mm screw's on the bottom of the device.
  • Start by using the PH00 Phillips Screwdriver to take out the 6 1 mm screw's on the bottom of the device.

  • Pry open the aluminium plate using the Plastic Opening Tool(s).

  • Remove the 2 1 mm screws using the PH00 Phillips Screwdriver.

Ajouter un commentaire

Pry open the back case as shown using the Plastic Opening Tool.
  • Pry open the back case as shown using the Plastic Opening Tool.

  • Disconnect the battery from motherboard by carefully pulling up on the connector.

Ajouter un commentaire

  • Unscrew the 9 1 mm screwdrivers using a PH00 Phillips Screwdriver.

  • Carefully detach the motherboard, from the housing unit using your hands.

Ajouter un commentaire

  • Detach the upper part of the motherboard from the bottom, using your hands.

Ajouter un commentaire

  • Speakers are two small rectangles located above the button of the doorbell.

Ajouter un commentaire

  • To remove the speakers pry each one out carefully with a plastic opening tool.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Oscar Pascual-Diego

Membre depuis le 20/02/2018

85 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team S11-G5, Cheng Spring 2018 Membre de l'équipe USF Tampa, Team S11-G5, Cheng Spring 2018

USFT-CHENG-S18S11G5

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 18

Total : 80