Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

This guide begins after completing the motherboard replacement guide. All you will need for speaker replacement is a plastic opening tool. Speaker replacement may be needed if you are having sound issues.

Pièces

Aucune pièce spécifiée.

  1. Start by using the PH00 Phillips Screwdriver to take out the 6 1 mm screw's on the bottom of the device. Pry open the aluminium plate using the Plastic Opening Tool(s). Remove the 2 1 mm screws using the PH00 Phillips Screwdriver.
    • Start by using the PH00 Phillips Screwdriver to take out the 6 1 mm screw's on the bottom of the device.

    • Pry open the aluminium plate using the Plastic Opening Tool(s).

    • Remove the 2 1 mm screws using the PH00 Phillips Screwdriver.

  2. Pry open the back case as shown using the Plastic Opening Tool. Disconnect the battery from motherboard by carefully pulling up on the connector. Disconnect the battery from motherboard by carefully pulling up on the connector.
    • Pry open the back case as shown using the Plastic Opening Tool.

    • Disconnect the battery from motherboard by carefully pulling up on the connector.

  3. Manta Precision Bit Set

    112 embouts pour toute réparation.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  4. Unscrew the 9 1 mm screwdrivers using a PH00 Phillips Screwdriver. Carefully detach the motherboard, from the housing unit using your hands. Carefully detach the motherboard, from the housing unit using your hands.
    • Unscrew the 9 1 mm screwdrivers using a PH00 Phillips Screwdriver.

    • Carefully detach the motherboard, from the housing unit using your hands.

  5. Detach the upper part of the motherboard from the bottom, using your hands. Detach the upper part of the motherboard from the bottom, using your hands.
    • Detach the upper part of the motherboard from the bottom, using your hands.

  6. Speakers are two small rectangles located above the button of the doorbell.
    • Speakers are two small rectangles located above the button of the doorbell.

  7. To remove the speakers pry each one out carefully with a  plastic opening tool.
    • To remove the speakers pry each one out carefully with a plastic opening tool.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Oscar Pascual-Diego

Membre depuis le 20/02/2018

85 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team S11-G5, Cheng Spring 2018 Membre de l'équipe USF Tampa, Team S11-G5, Cheng Spring 2018

USFT-CHENG-S18S11G5

3 membres

5 tutoriels rédigés

Where does one get replacement speakers for the 88RG000FC100 ring doorbell?

Jeffrey Lang - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 9

30 derniers jours : 51

Total : 1,047