Réparez vos affaires Communauté Boutique

Rival Mini Chopper MC-67BL Power Button Replacement

Introduction

This guide will help you remove the power button.

Ce dont vous avez besoin

  1. Rival Mini Chopper MC-67BL Power Button Replacement, Turning Gears: étape 1, image 1 de 2 Rival Mini Chopper MC-67BL Power Button Replacement, Turning Gears: étape 1, image 2 de 2

    • Twist the plastic lid counterclockwise to unlock it.

    • Lift the lid to remove it from the container.

    Modifier

  2. Rival Mini Chopper MC-67BL Power Button Replacement: étape 2, image 1 de 1

    • Carefully remove the blade from the container.

    • For reassembly, the teeth on the metal shaft line up with slots on the inside of the plastic hole.

    Modifier

  3. Rival Mini Chopper MC-67BL Power Button Replacement: étape 3, image 1 de 1

    • With your hand, twist the container counter-clockwise until it unlocks from the base. Remove the container by lifting it straight up.

    Modifier

  4. Rival Mini Chopper MC-67BL Power Button Replacement: étape 4, image 1 de 1

    • Use your fingers to pry out the two rubber feet from the bottom cover of the base.

    • The two feet furthest from the button tower contain screws. The other two feet do not.

    Modifier

  5. Rival Mini Chopper MC-67BL Power Button Replacement: étape 5, image 1 de 2 Rival Mini Chopper MC-67BL Power Button Replacement: étape 5, image 2 de 2

    • Use the Phillips #2 screwdriver to unscrew the two 12.7-mm screws underneath the rubber feet.

    • Use the same screwdriver to unscrew the 15.88-mm screw from the back of the chopper.

    Modifier

  7. Rival Mini Chopper MC-67BL Power Button Replacement: étape 6, image 1 de 1

    • Firmly lift the bottom cover off of the base.

    Modifier

  8. Rival Mini Chopper MC-67BL Power Button Replacement: étape 7, image 1 de 1

    • Remove the smaller white gear by lifting it up with your hand.

    Modifier

  9. Rival Mini Chopper MC-67BL Power Button Replacement: étape 8, image 1 de 3 Rival Mini Chopper MC-67BL Power Button Replacement: étape 8, image 2 de 3 Rival Mini Chopper MC-67BL Power Button Replacement: étape 8, image 3 de 3

    • Use a pair of pliers or any other clamping tool to securely hold the blade-shaft that sits above the base.

    • Grab the gear with your other hand and turn CLOCKWISE. Unlike most screws, the gear is reverse-threaded to allow the blade to spin.

    • Continue turning the gear until completely removed from the blade-shaft.

    Modifier

  10. Rival Mini Chopper MC-67BL Power Button Replacement, Power Button: étape 9, image 1 de 1

    • Use your hand to firmly pull the blade-shaft from the base.

    Modifier

  11. Rival Mini Chopper MC-67BL Power Button Replacement: étape 10, image 1 de 1

    • Using Phillips #2 screwdriver, unscrew two 12.7-mm screws in the middle of the base.

    Modifier

  12. Rival Mini Chopper MC-67BL Power Button Replacement: étape 11, image 1 de 1

    • Unwind power cord from the base pegs.

    Modifier

  13. Rival Mini Chopper MC-67BL Power Button Replacement: étape 12, image 1 de 2 Rival Mini Chopper MC-67BL Power Button Replacement: étape 12, image 2 de 2

    • Use the plastic opening tool to pry open the base from the main body.

    • These two plastic prongs are pressed fit into the base. It may take some effort to pry the base completely off.

    • Once freed, lift the base panel from the main body and set it aside.

    Modifier

  14. Rival Mini Chopper MC-67BL Power Button Replacement: étape 13, image 1 de 2 Rival Mini Chopper MC-67BL Power Button Replacement: étape 13, image 2 de 2

    • Use a Phillips #2 screwdriver to remove the three 9.53-mm screws from inside the main body.

    • Next, turn the device upright and lift the upper casing from around the button gently.

    Modifier

  15. Rival Mini Chopper MC-67BL Power Button Replacement: étape 14, image 1 de 1

    • Remove the button by simply pulling it up.

    • Don't lose the spring under the button! Without it, the blender will not function.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 5 autres contributeurs

David Otsu

Membre depuis le 10/16/13

109 Réputation

1 tutoriel rédigé

Badges: 5

+ 2 badges supplémentaires

Équipe

Cal Poly, Team 4-29, Amido Fall 2013 Membre de l'équipe Cal Poly, Team 4-29, Amido Fall 2013

CPSU-AMIDO-F13S4G29

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 685