Introduction

This guide will help you remove the turning gears of the Rival Mini Blender. Removing the gears will allow you to access the interior components of the device.

Twist the plastic lid counterclockwise to unlock it.
  • Twist the plastic lid counterclockwise to unlock it.

  • Lift the lid to remove it from the container.

Ajouter un commentaire

Carefully remove the blade from the container.
  • Carefully remove the blade from the container.

  • For reassembly, the teeth on the metal shaft line up with slots on the inside of the plastic hole.

Ajouter un commentaire

  • With your hand, twist the container counter-clockwise until it unlocks from the base. Remove the container by lifting it straight up.

Ajouter un commentaire

  • Use your fingers to pry out the two rubber feet from the bottom cover of the base.

  • The two feet furthest from the button tower contain screws. The other two feet do not.

Ajouter un commentaire

  • Use the Phillips #2 screwdriver to unscrew the two 12.7-mm screws underneath the rubber feet.

  • Use the same screwdriver to unscrew the 15.88-mm screw from the back of the chopper.

Ajouter un commentaire

  • Firmly lift the bottom cover off of the base.

Ajouter un commentaire

  • Remove the smaller white gear by lifting it up with your hand.

Ajouter un commentaire

  • Use a pair of pliers or any other clamping tool to securely hold the blade-shaft that sits above the base.

  • Grab the gear with your other hand and turn CLOCKWISE. Unlike most screws, the gear is reverse-threaded to allow the blade to spin.

  • Continue turning the gear until completely removed from the blade-shaft.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Roxanne

Membre depuis le 17/10/2013

507 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 4-29, Amido Fall 2013 Membre de l'équipe Cal Poly, Team 4-29, Amido Fall 2013

CPSU-AMIDO-F13S4G29

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 339