Aller au contenu principal

Rotary Multi Selector Wheel Removal

Ce dont vous avez besoin

  1. Rotary Multi Selector Wheel Removal, Back Cover Removal: étape 1, image 1 de 3 Rotary Multi Selector Wheel Removal, Back Cover Removal: étape 1, image 2 de 3 Rotary Multi Selector Wheel Removal, Back Cover Removal: étape 1, image 3 de 3
    • Unscrew the two 3.5mm Phillips screws from the side with the AV outlet.

    • Unscrew the 3.5mm Phillips screw from the opposite side of the camera.

    • Unscrew the six 3.5mm Phillips screws from the bottom of the camera.

  2. Rotary Multi Selector Wheel Removal: étape 2, image 1 de 1
    • Carefully remove the back casing from the camera.

    • Be mindful when removing the back casing as there is a ribbon that still connects the back casing to the motherboard.

  3. Rotary Multi Selector Wheel Removal, Detaching Ribbon: étape 3, image 1 de 2 Rotary Multi Selector Wheel Removal, Detaching Ribbon: étape 3, image 2 de 2
    • Place the plastic opening tool underneath the ribbon tab as shown. Gently lift the tab up.

    • Gently pull the ribbon from the logic board with tweezers.

    • With the ribbon disconnected, the back casing should now be detached from the rest of the camera.

  4. Rotary Multi Selector Wheel Removal, Rotary Multi Selector Wheel: étape 4, image 1 de 3 Rotary Multi Selector Wheel Removal, Rotary Multi Selector Wheel: étape 4, image 2 de 3 Rotary Multi Selector Wheel Removal, Rotary Multi Selector Wheel: étape 4, image 3 de 3
    • Lift up the metal cover and its button slowly using the tweezers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew Lau

Membre depuis le 04/18/13

1 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 8-56, Johann Spring 2013 Membre de l'équipe Cal Poly, Team 8-56, Johann Spring 2013

CPSU-JOHANN-S13S8G56

4 membres

18 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 500