Réparez vos affaires Communauté Boutique

RotoZip Rebel REB01 Type 2 Power Cord Replacement

Introduction

Damaged power cord? Why throw your saw away when you can fix it. If your saw has a damaged power cord, this guide will provide you with step-by-step instructions for the power cord replacement.

Ce dont vous avez besoin

  1. RotoZip Rebel REB01 Type 2 Power Cord Replacement, Saw Casing: étape 1, image 1 de 1

    • Unplug the saw before attempting any of the replacement guides.

    • Orient the saw so that the handle is closest to you and the saw end points towards the left.

    Traduire

  2. RotoZip Rebel REB01 Type 2 Power Cord Replacement: étape 2, image 1 de 2 RotoZip Rebel REB01 Type 2 Power Cord Replacement: étape 2, image 2 de 2

    • Push down on the grey lock on the right side of the handle to unlock it.

    • Pull the handle to detach it from the saw.

    Traduire

  3. RotoZip Rebel REB01 Type 2 Power Cord Replacement: étape 3, image 1 de 2 RotoZip Rebel REB01 Type 2 Power Cord Replacement: étape 3, image 2 de 2

    • Lift the black lock at the tip of the saw to unlock the depth gauge.

    • Pull the depth gauge to detach it from the saw.

    Traduire

  5. RotoZip Rebel REB01 Type 2 Power Cord Replacement: étape 4, image 1 de 1

    • Rotate the device so that the bottom of the saw is facing upwards.

    • Remove the six 20mm screws with a 6mm flathead screwdriver.

    Traduire

  6. RotoZip Rebel REB01 Type 2 Power Cord Replacement: étape 5, image 1 de 2 RotoZip Rebel REB01 Type 2 Power Cord Replacement: étape 5, image 2 de 2

    • Cut through the stickers on the right and left sides of the saw using a metal spudger.

    • Pull off the top half of the casing.

    Traduire

  7. RotoZip Rebel REB01 Type 2 Power Cord Replacement, Power Cord: étape 6, image 1 de 2 RotoZip Rebel REB01 Type 2 Power Cord Replacement, Power Cord: étape 6, image 2 de 2

    • Remove the two 14 mm screws on the plastic plate holding the power cord with a flat head screwdriver.

    • Lift off the plastic plate holding the power cord with a tweezer.

    Traduire

  8. RotoZip Rebel REB01 Type 2 Power Cord Replacement: étape 7, image 1 de 1

    • Pull the switchboard out slowly.

    • The power switch will also come out. Set it on the side.

    Traduire

  9. RotoZip Rebel REB01 Type 2 Power Cord Replacement: étape 8, image 1 de 2 RotoZip Rebel REB01 Type 2 Power Cord Replacement: étape 8, image 2 de 2

    • Pinch the two white clips with your thumb while simultaneously removing the black and white wires.

    • Remove the power cord from the saw.

    • When reassembling, make sure to plug the black wire into the top clip.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Ezzeddeen Gazali

Membre depuis le 10/06/16

81 Réputation

1 tutoriel rédigé

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team 4-4, Livingston Fall 2016 Membre de l'équipe Cal Poly, Team 4-4, Livingston Fall 2016

CPSU-LIVINGSTON-F16S4G4

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 6

Total : 595