Aller au contenu principal

Rubber Watch Battery Replacement

Ce dont vous avez besoin

  1. Rubber Watch Battery Replacement, Battery: étape 1, image 1 de 2 Rubber Watch Battery Replacement, Battery: étape 1, image 2 de 2
    • Begin by placing the watch on its backside.

  2. Rubber Watch Battery Replacement: étape 2, image 1 de 3 Rubber Watch Battery Replacement: étape 2, image 2 de 3 Rubber Watch Battery Replacement: étape 2, image 3 de 3
    • Gently pull the top of the watch's back until the cap detaches, in a peeling motion.

    • Pull out the white cap and green chip once it is free.

  3. Rubber Watch Battery Replacement: étape 3, image 1 de 1
    • Carefully puncture the plastic casing next to the battery on top of the green chip with the X-Acto knife and stop.

    • Be careful not to insert the X-Acto knife too downward into the battery.

  4. Rubber Watch Battery Replacement: étape 4, image 1 de 3 Rubber Watch Battery Replacement: étape 4, image 2 de 3 Rubber Watch Battery Replacement: étape 4, image 3 de 3
    • Flip the chip around to the front.

    • In a chiseling motion, make an incision on the front side above the battery to cut out a plastic casing.

    • Make sure to hold the knife away from the hands in a safe, stable grip.

    • Remove the cut plastic casing over the battery.

    • The plastic casing should come off like a cap.

  5. Rubber Watch Battery Replacement: étape 5, image 1 de 1
    • Gently remove the battery with a spudger or a wooden coffee stick.

    • Using too much force may detach the tab holding the battery and break the watch.

    • Once free, remove the dead battery.

  6. Rubber Watch Battery Replacement: étape 6, image 1 de 1
    • Insert the new battery.

    • Place the cut plastic cap casing over the chip and battery.

  7. Rubber Watch Battery Replacement: étape 7, image 1 de 3 Rubber Watch Battery Replacement: étape 7, image 2 de 3 Rubber Watch Battery Replacement: étape 7, image 3 de 3
    • Place the white cap over the green chip.

    • Insert the white cap and green chip into the back of the watch with the spudger or wooden coffee stick.

    • Turn over the watch and check the power.

Ligne d'arrivée

Lee

Membre depuis le 04/28/17

110 Réputation

1 tutoriel rédigé

Équipe

UC Davis, Team S2-G5, Cole Spring 2017 Membre de l'équipe UC Davis, Team S2-G5, Cole Spring 2017

UCD-COLE-S17S2G5

3 membres

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 5

Total : 737