Réparez vos affaires Communauté Boutique

Ryobi P271 Trigger Replacement

Introduction

This repair is for if your trigger on your drill stops working or has issues cutting in and out. Soldering is required for this repair and it will fix your drill trigger for future use.

Ce dont vous avez besoin

  1. Ryobi P271 Trigger Replacement, Battery: étape 1, image 1 de 3 Ryobi P271 Trigger Replacement, Battery: étape 1, image 2 de 3 Ryobi P271 Trigger Replacement, Battery: étape 1, image 3 de 3

    • Detach the battery unit from the drill body by pressing the battery release buttons on both sides of the unit and pulling outwards.

    Modifier

  2. Ryobi P271 Trigger Replacement, Trigger: étape 2, image 1 de 1

    • Remove the screws from the drill's casing to gain access to the interior.

    Modifier

  4. Ryobi P271 Trigger Replacement: étape 3, image 1 de 1

    • Lift and remove the casing off of the drill body.

    Modifier

  5. Ryobi P271 Trigger Replacement: étape 4, image 1 de 1

    • Carefully lift and remove the battery clip, trigger, motor, and everything connected to the wires and pull straight out of the drill.

    Modifier

  6. Ryobi P271 Trigger Replacement: étape 5, image 1 de 1

    • Separate the wiring from the trigger and the motor using a soldering iron and them replace them with a new trigger and motor by soldering the wires back together.

    • Follow this guide for soldering tips.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 6 autres contributeurs

nathan krehbiel

Membre depuis le 11/05/19

229 Réputation

2 tutoriels rédigés

Badges: 3

Équipe

UMass Dartmouth, Team S2-G6, Barthe Fall 2019 Membre de l'équipe UMass Dartmouth, Team S2-G6, Barthe Fall 2019

UMASSD-BARTHE-F19S2G6

3 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 6

30 derniers jours : 15

Total : 482