Réparez vos affaires Communauté Boutique

Ryobi RJ1861V Motor Housing Replacement

Ce dont vous avez besoin

  1. Ryobi RJ1861V Motor Housing Replacement, Trigger Assembly: étape 1, image 1 de 1

    • Use a Torx T20 screwdriver to remove the nine 16.5 mm screws around the trigger assembly.

    Modifier

  2. Ryobi RJ1861V Motor Housing Replacement: étape 2, image 1 de 2 Ryobi RJ1861V Motor Housing Replacement: étape 2, image 2 de 2

    • Use a Torx T20 screwdriver to remove the two 16.5 mm screws near the trigger.

    Modifier

  4. Ryobi RJ1861V Motor Housing Replacement, Motor Housing: étape 3, image 1 de 1

    • Use a Torx T20 bit or screwdriver to remove the six 19 mm screws securing the gear case cover.

    Modifier

  5. Ryobi RJ1861V Motor Housing Replacement: étape 4, image 1 de 2 Ryobi RJ1861V Motor Housing Replacement: étape 4, image 2 de 2

    • Use a Phillips #2 bit or screwdriver to remove the four 37 mm screws from the top and the bottom of the gear case.

    • Once these 4 screws are removed, you have access to the motor assembly.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 117