Introduction
This guide will help you replace the buttons in your Sega Genesis Flashback controller. You’ll need a Phillips #000 screwdriver to complete this guide.
Ce dont vous avez besoin
-
-
Hold the controller with the bottom plate facing up, and gently remove the top plate that is connected to the motherboard of the controller. Set the top plate aside.
-
Remove the screws on the back of the controller with the Phillips #000 screwdriver.
-
-
-
Use two fingers to remove each rubber membrane that rests on top of the buttons.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.