Introduction
In this guide I will show you how to replace the battery in a SHARK WANDVAC WV205. This is a simple process that will be easy to follow, no matter the experience level.
This guide is important since there might be some difficulties when doing this for the first time that can easily be avoided with proper instructions, like the kind in this guide.
Ce dont vous avez besoin
-
-
Push the sliding button to open the dirt capsule to empty it out.
Demander à FixBot
-
-
-
Using a coin or other thin item, such as a guitar pick, push the cap at the end of the vacuum out. Switch between sides to make it come out evenly.
-
-
-
-
To properly store and then dispose of the battery put it in a clear plastic bag.
-
-
-
Slot your replacement battery where the old one was.
-
Once inside, push hard on the end until you hear a click.
-
To properly dispose of the old battery consult your cities policies on lithium ion battery disposal.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Équipe
York University, Team P-22, O'Regan Winter 2024 Membre de l'équipe York University, Team P-22, O'Regan Winter 2024
YORK-O'REGAN-W24SPG22
1 membre
2 tutoriels rédigés
