Introduction
Piston O-rings for older Saeco Brewgroup.
This is the version with the Glasball.
Ce dont vous avez besoin
-
-
I show you the O-rings in the top piston of the brewgroup. I don't write much, because my english is bad, but the photos speak for themselves. Good luck
-
Two screws, PZ 1
-
Careful, there is a spring.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
4 autres ont terminé cette réparation.