Aller au contenu principal

Introduction

If the water tank drips when it is not installed in the machine, then the water tank seal needs to be replaced. This simple repair will be demonstrate hier. If the water tank loses water while it is inserted in the coffee machine, then the water tank seal in the unit needs to replaced. This is shown here

  1. Lift the water tank off the machine
    • Lift the water tank off the machine

  2. With your fingers pull the filter off the water outlet.
    • With your fingers pull the filter off the water outlet.

  3. With your fingers press the valve stem from the bottom up . Now you can pry off the seal with a spatula tip.
    • With your fingers press the valve stem from the bottom up . Now you can pry off the seal with a spatula tip.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Merci à ces traducteurs :

100%

oldturkey03 nous aide à réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›

VauWeh

Membre depuis le 19/10/2015

76 316 Réputation

87 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 26

Total : 228