Réparez vos affaires Communauté Boutique

Samsung 27E510C NAV Button Replacement

Introduction

The JOG button is used to control monitor functions like volume, brightness, and contrast. Common issues of this feature include the button sticking and the control stick breaking off.

Ce dont vous avez besoin

  1. Samsung 27E510C NAV Button Replacement, Back Panel: étape 1, image 1 de 3 Samsung 27E510C NAV Button Replacement, Back Panel: étape 1, image 2 de 3 Samsung 27E510C NAV Button Replacement, Back Panel: étape 1, image 3 de 3

    • Use the #1 Phillips head screw driver to remove each 13.75mm length screw from the rear panel.

    • The screw alone with the ports is a different size than the rest, its length is 12mm.

    Modifier

  2. Samsung 27E510C NAV Button Replacement: étape 2, image 1 de 2 Samsung 27E510C NAV Button Replacement: étape 2, image 2 de 2

    • Insert the heavy duty spudger in between the monitors back panel and its frame.

    • Use the heavy duty spudger to pry open the back panel.

    • Over aggressive prying could break the tabs holding the back panel in place.

    Modifier

  3. Samsung 27E510C NAV Button Replacement, Rear navigation button: étape 3, image 1 de 1

    • Carefully remove the tape holding down the connector wire.

    • You will need to re-attach the tape upon reassembly.

    Modifier

  5. Samsung 27E510C NAV Button Replacement: étape 4, image 1 de 1

    • Disconnect the navigation button from the motherboard by holding down the thumb tab and pulling its connector out.

    Modifier

  6. Samsung 27E510C NAV Button Replacement: étape 5, image 1 de 2 Samsung 27E510C NAV Button Replacement: étape 5, image 2 de 2

    • Remove the navigation buttons connector wire from the monitors body tab.

    Modifier

  7. Samsung 27E510C NAV Button Replacement: étape 6, image 1 de 1

    • With one thumb, hold down the tab on the bottom of the navigation buttons base.

    • While holding the tab down, lift the base of the navigation button with your other hand.

    Modifier

  8. Samsung 27E510C NAV Button Replacement: étape 7, image 1 de 3 Samsung 27E510C NAV Button Replacement: étape 7, image 2 de 3 Samsung 27E510C NAV Button Replacement: étape 7, image 3 de 3

    • Remove the connector wire from the defective navigation button by first gripping its connectors thumb tab.

    • While gripping the thumb tab, pull the connector from the base of the navigation button.

    • You can save the connector wire since it may not be defective.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

giggythore

Membre depuis le 10/14/17

366 Réputation

3 tutoriels rédigés

Badges: 13

+ 10 badges supplémentaires

Équipe

Cal Poly, Team S9-G1, Banghart Fall 2017 Membre de l'équipe Cal Poly, Team S9-G1, Banghart Fall 2017

CPSU-BANGHART-F17S9G1

6 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 453