Introduction

This guide may be used to remove the charger port from the Samsung ATIV Book 9 Plus for replacement. Have a Phillips screw driver handy. Make sure you are able to keep track of all the screws removed and where they belong (a magnetic project mat would be helpful). Replacement charger ports should be purchased from the laptop's original manufacturing company. When removing the port, make sure not to damage any connections that connect the charging port to the laptop.

Turn the laptop upside down so that the underside of the laptop is facing you.
  • Turn the laptop upside down so that the underside of the laptop is facing you.

  • Use a Phillips #000 screwdriver to unscrew the 4.3 mm screws located on the edges and corners of the laptop.

Ajouter un commentaire

Lift the cover to reveal the interior of the laptop.
  • Lift the cover to reveal the interior of the laptop.

Ajouter un commentaire

  • Unscrew the 4.3mm screws holding down the plastic cover using a #000 screwdriver. After the screws are out remove the cover.

  • Remove the 4.3 mm screw holding down the metal cover using a #000 screwdriver.

Ajouter un commentaire

  • Disconnect the charging port from the motherboard by gently tugging on the plastic part of the connection.

Ajouter un commentaire

  • Wedge a plastic opening tool or spudger in between the laptop casing and the port. Pry until you feel it release.

  • This will take some force because the port is glued to the casing.

Ajouter un commentaire

  • Remove the disconnected charger port.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Casey Kauffman

Membre depuis le 06/11/2017

215 Réputation

2 tutoriels rédigés

Équipe

IUPUI, Team S6-G6, Baechle Fall 2017 Membre de l'équipe IUPUI, Team S6-G6, Baechle Fall 2017

IUPUI-BAECHLE-F17S6G6

3 membres

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 8

30 derniers jours : 29

Total : 291