Réparez vos affaires Communauté Boutique

Samsung Alias 2 Hinge Replacement

Introduction

This guide provides an outline of how to remove and replace the hinge in the Samsung Alias 2. The hinge holds the phone together and allows the spring action of the flip phone. This repair would need to happen if the phone is unable to close or if it is in 2 seperate pieces.

Ce dont vous avez besoin

  1. Samsung Alias 2 Hinge Replacement, Battery: étape 1, image 1 de 1

    • Push down on the back cover of the phone, then remove the back cover.

    Modifier

  2. Samsung Alias 2 Hinge Replacement: étape 2, image 1 de 1

    • Remove the battery.

    Modifier

  3. Samsung Alias 2 Hinge Replacement, Hinge: étape 3, image 1 de 1

    • Use a Phillips #00 screwdriver to remove the two 4 mm screws on screen.

    Modifier

  4. Samsung Alias 2 Hinge Replacement: étape 4, image 1 de 2 Samsung Alias 2 Hinge Replacement: étape 4, image 2 de 2

    • Use the opening tool to remove the front outside casing.

    Modifier

  5. Samsung Alias 2 Hinge Replacement: étape 5, image 1 de 1

    • Remove ribbon connector next to camera using tweezers.

    Modifier

  6. Samsung Alias 2 Hinge Replacement: étape 6, image 1 de 1

    • Unscrew and remove the two 3.95 mm screws underneath that ribbon connector.

    • Be careful not to lose their accompanying plastic washers.

    Modifier

  7. Samsung Alias 2 Hinge Replacement: étape 7, image 1 de 2 Samsung Alias 2 Hinge Replacement: étape 7, image 2 de 2

    • Pull the two halves of the phone apart.

    • The phone will not slide straight apart. You have to angle the back half up a little.

    • Do not force it. Jiggle it a little if it doesn't come apart.

    Modifier

  8. Samsung Alias 2 Hinge Replacement: étape 8, image 1 de 1

    • Remove the plastic panel cover from the hinge.

    Modifier

  9. Samsung Alias 2 Hinge Replacement: étape 9, image 1 de 2 Samsung Alias 2 Hinge Replacement: étape 9, image 2 de 2

    • Remove the 3.41 mm screw out from underneath plastic cover.

    Modifier

  10. Samsung Alias 2 Hinge Replacement: étape 10, image 1 de 2 Samsung Alias 2 Hinge Replacement: étape 10, image 2 de 2

    • Pop out the top half of the hinge with the plastic opening tool. This will release the hinge cover for removal.

    Modifier

  11. Samsung Alias 2 Hinge Replacement: étape 11, image 1 de 2 Samsung Alias 2 Hinge Replacement: étape 11, image 2 de 2

    • Pull off the hinge cover.

    Modifier

  12. Samsung Alias 2 Hinge Replacement: étape 12, image 1 de 2 Samsung Alias 2 Hinge Replacement: étape 12, image 2 de 2

    • Remove the two 2.71 mm screws on the hinge using screwdriver.

    • Under these screws will be a washer, spring, and small metal disc. Make sure you don't lose these.

    Modifier

  13. Samsung Alias 2 Hinge Replacement: étape 13, image 1 de 1

    • Remove the Verizon logo from the back of phone using the plastic opening tool.

    • The logo is attached with glue. It will be sticky, but it just pulls off.

    Modifier

  14. Samsung Alias 2 Hinge Replacement: étape 14, image 1 de 1

    • Remove the four 4.44 mm screws from the back.

    • Remove the three 4.35mm screws from under the Verizon logo.

    • Make sure you don't mix the screws together.

    Modifier

  15. Samsung Alias 2 Hinge Replacement: étape 15, image 1 de 1

    • Pull the back off by using the plastic opening tool.

    • Do not lose the buttons on the side of the phone, as they will come off of the phone when you remove the back outside casing.

    Modifier

  16. Samsung Alias 2 Hinge Replacement: étape 16, image 1 de 1

    • Pull up on the yellow tab.

    Modifier

  17. Samsung Alias 2 Hinge Replacement: étape 17, image 1 de 1

    • Disconnect the connecting cord using tweezers.

    Modifier

  18. Samsung Alias 2 Hinge Replacement: étape 18, image 1 de 1

    • Disconnect the rectangular ribbon.

    Modifier

  19. Samsung Alias 2 Hinge Replacement: étape 19, image 1 de 1

    • Remove the logic board.

    Modifier

  20. Samsung Alias 2 Hinge Replacement: étape 20, image 1 de 1

    • Remove the three 3.95 mm screws.

    • The two rightmost screws must be pulled out with tweezers after unscrewed.

    Modifier

  21. Samsung Alias 2 Hinge Replacement: étape 21, image 1 de 1

    • Pull the hinge out.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 8 autres contributeurs

Chris

Membre depuis le 04/16/11

133 Réputation

5 tutoriels rédigés

Badges: 7

+ 4 badges supplémentaires

Équipe

Cal Poly, Team 12-35, Maness Spring 2011 Membre de l'équipe Cal Poly, Team 12-35, Maness Spring 2011

CPSU-MANESS-S11S12G35

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 12

Total : 4,298