Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

This guide tells you how to remove a faulty logic board and install a new one.

  1. push down the back cover of the phone, then take it out.
    • push down the back cover of the phone, then take it out.

  2. Remove the battery.
    • Remove the battery.

  3. Remove the (4) 4.2 mm screws from the four corners of the battery slot.
    • Remove the (4) 4.2 mm screws from the four corners of the battery slot.

  4. Use plastic opening tools to peel off plastic Verizon logo tab from the top of the back outside.
    • Use plastic opening tools to peel off plastic Verizon logo tab from the top of the back outside.

    • Note: The tab is stuck on there with glue, this is alright, just peel it off.

  5. Remove the (3) newly uncovered 4.3 mm screws.
    • Remove the (3) newly uncovered 4.3 mm screws.

  6. Remove the back outside casing using the plastic opening tool.
    • Remove the back outside casing using the plastic opening tool.

    • Warning: Do Not lose the buttons on the side of the phone, as they will come off of the phone when you remove the back outside casing.

  7. Pull up on the yellow tab.
    • Pull up on the yellow tab.

  8. Disconnect connecting cord using tweezers.
    • Disconnect connecting cord using tweezers.

  9. Disconnect rectangular ribbon.
    • Disconnect rectangular ribbon.

  10. Remove logic board.
    • Remove logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Chris

Membre depuis le 16/04/2011

133 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 12-35, Maness Spring 2011 Membre de l'équipe Cal Poly, Team 12-35, Maness Spring 2011

CPSU-MANESS-S11S12G35

4 membres

10 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 2,603