Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

  1. push down the back cover of the phone, then take it out.
    • push down the back cover of the phone, then take it out.

  2. Remove the battery.
    • Remove the battery.

  3. Remove the two (4.1 mm) screws down the screen.
    • Remove the two (4.1 mm) screws down the screen.

  4. Remove the upper casing with a plastic opening tools. Remove the upper casing with a plastic opening tools.
    • Remove the upper casing with a plastic opening tools.

  5. Use soldering iron to melt, and remove soldering joints of the speaker.
    • Use soldering iron to melt, and remove soldering joints of the speaker.

  6. Use tweezers to remove the speaker from its place. Note: There are two speakers. Make sure you know which one is broken before removing it.
    • Use tweezers to remove the speaker from its place.

    • Note: There are two speakers. Make sure you know which one is broken before removing it.

  7. Use tweezers to insert the new speaker into the speaker slot. Use tweezers to insert the new speaker into the speaker slot.
    • Use tweezers to insert the new speaker into the speaker slot.

  8. Solder a speaker ribbon to the logic board.
    • Solder a speaker ribbon to the logic board.

    • Note: be careful to match the right polarity before you solder.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Chris

Membre depuis le 16/04/2011

133 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 12-35, Maness Spring 2011 Membre de l'équipe Cal Poly, Team 12-35, Maness Spring 2011

CPSU-MANESS-S11S12G35

4 membres

10 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 1,980