Aller au contenu principal

Samsung BD-F5900 DVD Disc Tray Replacement

Ce dont vous avez besoin

  1. Samsung BD-F5900 DVD Disc Tray Replacement, Top Cover: étape 1, image 1 de 1
    • Using a #1 Phillips head screwdriver, remove the three 10mm screws on the back panel.

    • Tilt the back of the top cover forward to remove from chassis.

  2. Samsung BD-F5900 DVD Disc Tray Replacement: étape 2, image 1 de 1
    • Gently pull up on the ribbon cable by the blue tab to remove it from the power supply board.

  3. Samsung BD-F5900 DVD Disc Tray Replacement, DVD Disc Tray: étape 3, image 1 de 1
    • Remove the two ribbon cables from the Main Logic Board assembly by gently pulling up on the blue tab.

    • Be careful not to damage the ribbon cable by using too much force.

  4. Samsung BD-F5900 DVD Disc Tray Replacement: étape 4, image 1 de 1
    • Using a #1 Phillips head screwdriver, remove the two 7.5 mm screws (one not shown) near the front that secures the disc tray to the chassis.

  5. Samsung BD-F5900 DVD Disc Tray Replacement: étape 5, image 1 de 1
    • Push two small prongs on either side of disc tray inwards and push disc tray forward.

  6. Samsung BD-F5900 DVD Disc Tray Replacement: étape 6, image 1 de 1
    • Remove disc tray

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Louis McKean

Membre depuis le 10/18/17

528 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S1-G21, Cagle Fall 2017 Membre de l'équipe USF Tampa, Team S1-G21, Cagle Fall 2017

USFT-CAGLE-F17S1G21

3 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 8

Total : 651