Introduction

How to replace the keyboard on a Samsung Captivate Glide.

Remove back cover using fingernail or plastic opening tool. The cover pulls up and off.
  • Remove back cover using fingernail or plastic opening tool. The cover pulls up and off.

Ajouter un commentaire

Remove battery with plastic opening tool or finger.
  • Remove battery with plastic opening tool or finger.

Ajouter un commentaire

  • Remove the seven screws from backplate using the #00 screwdriver.

Ajouter un commentaire

  • Remove the back plate using the plastic opening tool.

  • There is a lip on each side, and both must be pried up.

  • You can work your way around the edges after prying the two sides.

Ajouter un commentaire

  • Use the plastic opening tool to detach the two tabs connecting the motherboard to the base of the phone.

Ajouter un commentaire

  • Disconnect the antenna cable from the motherboard using tweezers.

Ajouter un commentaire

  • Remove the single screw connecting the motherboard to the base of the phone by using the #00 Phillips screwdriver.

Ajouter un commentaire

  • Lift the motherboard out of the base of the phone.

Ajouter un commentaire

  • Remove the eight screws using the #00 screw driver.

Ajouter un commentaire

  • Remove blue tape using the tweezers.

Ajouter un commentaire

  • Remove screws using the #00 screwdriver.

Ajouter un commentaire

  • Using the plastic opening tool, remove the back plate by prying on the four main points.

  • You may encounter difficultly at certain points. Work the plastic opening tool along the edge to keep back plate from closing again.

Ajouter un commentaire

  • Lift the back plate.

  • To remove the attached flex cable, gently peel the flex cable connecting to the back plate.

  • Flex cable is attached to the back plate with an adhesive.

Ajouter un commentaire

  • Slide the flex cable through the slot.

  • Set the front plate down. Now you have free access to the keyboard.

Ajouter un commentaire

  • Manually lift the keyboard and replace with new keyboard.

  • Make sure the new keyboard is placed with the keyboard letters facing down, and the white back facing up.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jessica Martinez

Membre depuis le 25/09/2014

253 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team 5-3, Mcgee Fall 2014 Membre de l'équipe USF Tampa, Team 5-3, Mcgee Fall 2014

USFT-MCGEE-F14S5G3

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 297