Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

If one of your keys is no longer working, follow this guide and learn how to successfully replace a broken key cap or gain access to clean underneath it.

Pièces

Aucune pièce spécifiée.

  1. Using a plastic opening tool, place it beneath the key in question and pry it off. Using a plastic opening tool, place it beneath the key in question and pry it off.
    • Using a plastic opening tool, place it beneath the key in question and pry it off.

  2. Manta Precision Bit Set

    112 embouts pour toute réparation.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  3. Remove the key fully from the board.
    • Remove the key fully from the board.

  4. Place a new key in the same orientation as the other keys.
    • Place a new key in the same orientation as the other keys.

    • Use your index finger to apply pressure onto the key until it clicks into place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Alex Edwards

Membre depuis le 01/02/2016

125 Réputation

1 tutoriel rédigé

Équipe

UW Tacoma, Team 1-3, Rose Winter 2016 Membre de l'équipe UW Tacoma, Team 1-3, Rose Winter 2016

UWT-ROSE-W16S1G3

4 membres

4 tutoriels rédigés

i tried this but a key stopped sticking to the board

darkclawsthenightwing - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 8

Total : 600