Introduction

This guide will show you how to remove your current SIM card port/slot and replace it with a new one.

Pièces

Aucune pièce nécessaire.

  1. Open up the back case on the phone from the groove in the bottom of the phone.
    • Open up the back case on the phone from the groove in the bottom of the phone.

    • You can do this by inserting a fingernail or similarly thin object into the groove and pulling up with mild force.

    Ajouter un commentaire

  2. Below the left part of the bottom of the battery area there will be a groove large enough to fit in a finger or screw driver head.
    • Below the left part of the bottom of the battery area there will be a groove large enough to fit in a finger or screw driver head.

    • Use the groove to lever out the battery gently, in order to not damage either the battery or phone. Store the battery in a safe place.

    Ajouter un commentaire

    • Push the SD card further into its metal slot until you hear a click.

    • Release the card, and it should automatically eject itself.

    • Remove the SD card.

    Ajouter un commentaire

  3. Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    • Slide the SIM card out of its casing by pushing on it and sliding it upward.

    Ajouter un commentaire

    • Carefully remove the back cover.

    • Locate the 7 small black screws located around the edge of the phone.

    • With a small philips head screwdriver, remove each of the screws, and place them in a secure location.

    Ajouter un commentaire

    • Removal of the back half of the casing.

      • Using a thin plastic flat head screw driver, or similar item. On the side of the phone insert the thin edge into the visible split between the 2 halves of the phone.

      • Use a prying motion to lift the casing up. This will separate the phone casing.

      • Repeat this motion all around the screen edge until the casing pops off.

    Ajouter un commentaire

    • Locate and release the volume button flex cable on the right.

    • Locate and release the pop connector on the motherboard located to the left of the SIM card port.

    Ajouter un commentaire

    • Your SIM card port is now unattached.

    • Remove SIM card port from motherboard.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Lucas Carter

Membre depuis le 27/09/2012

171 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 15-44, Forte Fall 2012 Membre de l'équipe Cal Poly, Team 15-44, Forte Fall 2012

CPSU-FORTE-F12S15G44

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 2,007