Aller au contenu principal

Introduction

You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's input jack module.

    • Remove the back battery cover.

  1. Remove the phone's battery.
    • Remove the phone's battery.

  2. Remove six (4.28 x 1.25)mm screws.
    • Remove six (4.28 x 1.25)mm screws.

  3. Fix Kits pour Android

    A new screen or battery is one kit away.

    Acheter maintenant

    Fix Kits pour Android

    A new screen or battery is one kit away.

    Acheter maintenant
  4. Use the spudger to gently pry the silver plastic back plate from the body of the phone. Use the spudger to gently pry the silver plastic back plate from the body of the phone.
    • Use the spudger to gently pry the silver plastic back plate from the body of the phone.

  5. Peel off the Identification sticker
    • Peel off the Identification sticker

  6. Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.
    • Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.

  7. Pop the speaker plug out of its socket.
    • Pop the speaker plug out of its socket.

  8. Peel the button sensor off the top of the case.
    • Peel the button sensor off the top of the case.

  9. Peel the Input jack assembly out of the case.
    • Peel the Input jack assembly out of the case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Sven

Membre depuis le 18/04/2011

40 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 15-11, Regan Spring 2011 Membre de l'équipe Cal Poly, Team 15-11, Regan Spring 2011

CPSU-REGAN-S11S15G11

5 membres

14 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,365