Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Switch off the phone.
-
Remove the battery and any installed SIM and memory card.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the 7 Phillips screws.
-
Use a plastic tool to remove the back cover.
-
vibrating motor
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the earpiece & light sensor flex cable.
-
Take off the Volume Up/Down buttons flex cable.
-
Do the same with the Power button flex cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the microphone.
-
Lift the board from the right side and disconnect the LCD display flex cable.
-
Remove the board from the middle frame.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
This is the loudspeaker & audio jack connector module.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a hair dryer and warm the touch screen glass to make adhesive soften.
-
Use a plastic tool for separating the glass from the middle frame.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Again by using a plastic tool, separate the LCD display from the middle frame.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Clean the middle frame and install the LCD display.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Install the touch screen and start with reassembling.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
That is all.
-
.
-
.
-
.
-
.
-
Did you do it successfully?
-
Annulation : je n'ai pas terminé ce tutoriel.
23 autres ont terminé cette réparation.