Aller au contenu principal

Introduction

Should the screen need to be replaced, this guide will outline how to do so.

  1. Use a T5 Torx screwdriver to remove the four 4.0 mm screws on the back of the device.
    • Use a T5 Torx screwdriver to remove the four 4.0 mm screws on the back of the device.

    • Be sure your device is turned off.

  2. Use a plastic opening tool to separate the display housing from from the device.
    • Use a plastic opening tool to separate the display housing from from the device.

    • To ensure you don't damage your device, insert the opening tool and slide it the entire length of the gap on both sides of the device.

  3. Gently pry back the metal flap on top of the connector. Locate the two 2.0 mm black screws and unscrew using a Phillips PH00 bit. The connector will detach from the device.
    • Gently pry back the metal flap on top of the connector.

    • Locate the two 2.0 mm black screws and unscrew using a Phillips PH00 bit. The connector will detach from the device.

  4. Fix Kits pour Android

    Remplacer l'écran ou la batterie est à portée de kit !

    Acheter maintenant

    Fix Kits pour Android

    Remplacer l'écran ou la batterie est à portée de kit !

    Acheter maintenant
  5. On the display, use a plastic opening tool to lift up the two ribbon cables the motherboard. On the display, use a plastic opening tool to lift up the two ribbon cables the motherboard.
    • On the display, use a plastic opening tool to lift up the two ribbon cables the motherboard.

  6. The motherboard is attached to the display using an adhesive
    • The motherboard is attached to the display using an adhesive

    • Using a heat gun, heat up the display for 4 to 5 minutes, making sure the move the heat gun around to distribute the heat around the display. This heats up the adhesive making the motherboard easier to remove

  7. Using a plastic opening tool, carefully  insert the opening tool in between the bezel and the motherboard and slide it the entire length of the logic board. Slowly pry up the motherboard from the display.
    • Using a plastic opening tool, carefully insert the opening tool in between the bezel and the motherboard and slide it the entire length of the logic board.

    • Slowly pry up the motherboard from the display.

  8. The display assembly is now separated and can be replaced
    • The display assembly is now separated and can be replaced

Conclusion

To reassemble your device, follow these instructions in reverse order.

Joe

Membre depuis le 11/04/2016

222 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 1-9, Maness Spring 2016 Membre de l'équipe Cal Poly, Team 1-9, Maness Spring 2016

CPSU-MANESS-S16S1G9

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 2

7 derniers jours : 7

30 derniers jours : 15

Total : 1,207