Aller au contenu principal

Fix Your Stuff

Right to Repair

Parts & Tools

Introduction

To access the interior of the device, the housing that contains the display needs to be removed. This guide will act as a prerequisite for all other guides.

Pièces

Aucune pièce spécifiée.

  1. Use a T5 Torx screwdriver to remove the four 4.0 mm screws on the back of the device.
    • Use a T5 Torx screwdriver to remove the four 4.0 mm screws on the back of the device.

    • Be sure your device is turned off.

  2. Use a plastic opening tool to separate the display housing from from the device.
    • Use a plastic opening tool to separate the display housing from from the device.

    • To ensure you don't damage your device, insert the opening tool and slide it the entire length of the gap on both sides of the device.

  3. Gently pry back the metal flap on top of the connector. Locate the two 2.0 mm black screws and unscrew using a Phillips PH00 bit. The connector will detach from the device.
    • Gently pry back the metal flap on top of the connector.

    • Locate the two 2.0 mm black screws and unscrew using a Phillips PH00 bit. The connector will detach from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Dalt Lasell

Membre depuis le 12/04/2016

454 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 1-9, Maness Spring 2016 Membre de l'équipe Cal Poly, Team 1-9, Maness Spring 2016

CPSU-MANESS-S16S1G9

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 14

Total : 974