Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the back cover of phone by lifting up on the back cover tab with the blue plastic opening tool.
-
Go around the edge of the back cover to completely remove it.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the old battery by lifting up on the thumb tab.
-
Periodically clean the brass terminals on the battery and the phone. Place a minute amount of ISO on a Q-tip and gingerly clean the connections.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the nine 4mm screws screws from the midframe with a Phillips #000 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Wedge the blue plastic opening tool in between the front and side panel.
-
Move the blue plastic opening tool around the edges between the front and side panel.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Make sure that you detach the mid-frame from the inside too.
-
Annulation : je n'ai pas terminé ce tutoriel.
42 autres ont terminé cette réparation.
3 commentaires
anyone can tell me how to swap vibrator motor?
I need some glue to replace the midframe after having changed it?
not necessary
yasir -