This is the back of the device and where you willl begin to take it apart
  • This is the back of the device and where you willl begin to take it apart

  • It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.

  • Use the plastic opening tools to pry along the indicated box.

  • Lift up the silver piece to reveal the rest of the back cover.

Ajouter un commentaire

Unscrew the three screws indicated by the red circles with the Philips #00 screwdriver.
  • Unscrew the three screws indicated by the red circles with the Philips #00 screwdriver.

  • Using the plastic opening tools pry along the bottom of the device, moving to the sides of the cover to the top.

  • Remove the back cover.

  • At this point use anti-static gloves or do NOT take it apart on carpet.

Ajouter un commentaire

  • Start by lifting the white connector to remove the part indicated by the red polygon.

  • Gently pry along the camera hub to lift it out of its location.

  • This is your camera. Replace it with the new part.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Bryan Fernandez

Membre depuis le 22/09/2014

232 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team 3-7, Brown Fall 2014 Membre de l'équipe USF Tampa, Team 3-7, Brown Fall 2014

USFT-BROWN-F14S3G7

3 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 8

Total : 1,682