Aller au contenu principal

Vidéo d'introduction

  1. Heat the back cover to melt the strong adhesive sticker underneath.
    • Heat the back cover to melt the strong adhesive sticker underneath.

  2. Try to pull and open a gap between back cover and  frame after heat. Insert into a guitar pick to cut the sticker.
    • Try to pull and open a gap between back cover and frame after heat. Insert into a guitar pick to cut the sticker.

  3. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  4. If you do it hardly, you need much more heat especially the edged side.
    • If you do it hardly, you need much more heat especially the edged side.

    • Slipping a playing card through the gap is a good way to loosen up the adhesive.

  5. Remove the back cover. The white stripe is the sticker.
    • Remove the back cover. The white stripe is the sticker.

Conclusion

To reassemble your device, follow these instructions in reverse order.

43 autre(s) ont terminé cette réparation.

Sophia

Membre depuis le 25/03/2014

41 691 Réputation

62 tutoriels rédigés

What about putting the one back on?

rcf917 - Réponse

will it go back on and stay on without new adhesive?

dfasdfjiun - Réponse

I suggest that you take new adhesive, old adhesive is not strong enough to hold back cover.

Witrigs -

You can check this video of put it back battery cover : https://www.youtube.com/watch?v=3HrmeVGY...

Witrigs - Réponse

How do I remove the sticky part

Marcelino Lopez - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 14

7 derniers jours : 115

30 derniers jours : 425

Total : 101,007