Ce dont vous avez besoin
-
-
Start off by taking the stylus pen out of the phone.
Demander à FixBot
-
-
-
Heat the back glass of the phone in order to soften the adhesive.
-
-
-
-
Apply the suction cup and pull up on the back glass. If you cannot get the back glass off, reheat it, then repeat this step.
-
Carefully insert the pick and pry up on the back glass.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
9 autres ont terminé cette réparation.
