Introduction

The headphone jack is the place where headphones are inserted into the phone to redirect the sound from the speaker to external headphones. If you are experiencing an issue, check to make sure the headphones are not the source. If you experience issues with multiple headphones in the same jack, you may consider replacing the jack. The headphone jack is connected to the vibrator and can be removed by gently pulling on the assembly.

Pièces

Aucune pièce nécessaire.

Insert your fingernail or a plastic tool into the opening near the headphone jack on top of the phone.
  • Insert your fingernail or a plastic tool into the opening near the headphone jack on top of the phone.

  • Gently pry apart the rear case from the midframe and remove.

Ajouter un commentaire

Insert your fingernail, or a plastic tool, into the crevice on the lower left side of the back side.
  • Insert your fingernail, or a plastic tool, into the crevice on the lower left side of the back side.

  • Gently pry the battery from the back of the phone.

Ajouter un commentaire

  • With the Phillips head screwdriver, remove all seven 4.0 mm screws, highlighted in red, from the rear case.

  • Insert your finger or an opening tool underneath the midframe and gently pry apart from the phone.

Ajouter un commentaire

  • The headphone jack is located near the top left side of the motherboard.

  • To remove the headphone jack, gently pull on the area indicated in red until it detaches from the motherboard.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autre(s) ont terminé cette réparation.

Keon Horahan

Membre depuis le 13/10/2014

809 Réputation

6 tutoriels rédigés

Équipe

Clemson, Team 3-3, Benson Fall 2014 Membre de l'équipe Clemson, Team 3-3, Benson Fall 2014

CLEM-BENSON-F14S3G3

5 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 1,190